Water contamination problems have been in the news a lot over the past few years in cities all over the world. There have been documented cases of lead, radium and other contaminants making it into the public drinking water of American cities from Flint, Michigan all the way to Brady, Texas and a fair number of places in between. Sometimes, it almost seems like it’s reached epidemic proportions.
These cases of water contamination aren’t the only ones that people have to worry about. There’s no telling what might be hiding in your public water, so it’s important to take the initiative and install a good quality faucet water filter to filter out these contaminants and ensure that you and your family’s water supply is as clean as it should be. That’s why we’ve included ten of the best filters that we’ve found during our research on the matter.
Best Faucet Water Filters – Top List
10PUR Advanced Faucet Filter System (PFM400H)
Equipped with Mineral Clear filters which have been certified to reduce over seventy different contaminants, including about 99% of the lead that may be lurking in your water, this Pur Water filter can filter about 100-gallons of water or about 3-months of average use. This filter system comes from a company that’s known for providing high-quality water filtration system for the past three decades. It just doesn’t remove lead, however. This product also removes up to 96% of the mercury and 92% of the pesticides that may be in your water. And it also removes the chlorine, so your water is not only cleaner but also tastes better.
9InstaPure Water Filtration System (F2BCT3P-1ES)
Although this filter isn’t designed to remove microbiological agents from your water supply, it is designed to make the water taste a whole lot better. After all, most people would agree that their potable water supply doesn’t taste as good as it should, which is why so many people buy water in plastic bottles. Fortunately, this filter solves that problem by removing some of the materials that can make water taste and smell bad. When this filter is properly installed, it can treat anywhere from 42 all the way to 200-gallons of water and can reduce chlorine significantly to improve water quality.
8DuPont Electric Metered Premium Filter (WFFM350XCH)
There’s a lot to be said for a filter that is not only easy to install with just a pair of pliers, but also has an easy-to-read digital display which shows you exactly how many gallons of water has been filtered. This allows you to easily estimate when the filter is reaching the end of its 200-gallon capacity cycle. This product will not only remove many of the things which make water taste and smell bad, but it also removes some pretty nasty components from the water. It removes chlorine, asbestos, mercury, lead, lindane, different types of sediment and even benzene.
7Pur FM-2000B Filtration System
This water filter mounts on your faucet and is not only easy to install but is also very to use. It has a convenient one-click installation process and can filter up to 100-gallons of water over a 3-month period. It’s equipped with a built-in indicator which lets you know when the product needs to be replaced. Designed to remove chlorine for better tasting water and up to 99% of lead and 96% of mercury for healthier water, this product is a good choice for anyone who wants an easy solution to better water. It’s a product that been independently certified and is manufactured by a trusted company.
6Culligan FM-25 Advanced Water Filter
Different people have different problems with their public water supply. Some people are affected by sediment in the water. Other people may not only their water’s chlorine taste and odor, and still, other people may be concerned about the contaminants found in the water coming from their tap. Fortunately, all of these people can turn to the same filter to solve their problem, the Culligan FM-25. This product deals with all of those problems and can remove lead, lindane, atrazine, and many types of sediment from your water supply. This makes the water taste better, smell better and improves its quality greatly.
5PUR Classic Vertical Filter Faucet (FM-3333)
Thanks to this high-quality faucet mount filtration system, just about anyone can drink better tasting and healthier water. It’s a 2-stage system that can filter up to 100-gallons of water or last approximately 3-months, depending upon which comes first. It also has a built-in indicator which allows the user to keep track of how much filter life they have left. And since it just clicks onto the faucet, it’s extremely easy to install. Once installed, this product will remove lead and chloroform, as well as a variety of organic contaminants. This makes this nice-looking filter a nice addition to just about any kitchen faucet.
4DuPont Premier Drinking Filter (WFFM100XCH)
If you not only want better tasting water but also water that’s better for you, then you may want to take a closer link at this faucet mounted system. It attaches to standard kitchen faucets very easily and removes a variety of sediments and contaminants from the water supply. This includes not only mercury and lead but also cysts, chlorine, asbestos, and linden. And it will also improve the odor and clarity of the water, too. It can filter up to 100-gallons during its lifespan. This product comes with the mount filter, two faucet adapter, and two washers, so it can be immediately installed.
3Waterdrop Long-Lasting Filtration System
With a filtering capacity of up to 320-gallons, this is probably one of the longest lasting kitchen filters currently available. In fact, it lasts up to three times longer than its leading competitor. The ability to filter a lot of water isn’t the only benefit it provides to its users, however. It also can filter water quickly, filling up to 16.9-ounce water bottles in a minute. The Activated Carbon Fiber its made with can remove a variety of different types of bacterial and sediment contaminants. And since it has a space-saving design, this filter system won’t interfere with the normal functioning of your sink.
2Culligan Chrome Finish Water Filter (FM-100-C)
This product produces better tasting water and does it by making the water safer to drink. It can easily remove a variety of different contaminants and can filter up to 200-gallons of water during a 2-month period. It also has a life indicator which shows the user just how much life this product has left and will turn red when a new cartridge is required. This filter has a beautiful chrome finish and a space-saving design that makes it easy to use. Some of the containment it can remove include lead, mercury, chlorine, atrazine, and lindane. It also improves odor and water clarity as well.
1Brita On Tap Faucet System
Easy-to-install, easy-to-use and easy-to-replace are just three things you can say about this innovative water filter. It easily clicks onto the faucet and is capable of filtering the equivalent of about 750 16.9-ounce bottles of water. It can remove lead and chlorine from the water, as well as a variety of other contaminants. It can also filter out a number of industrial pollutants including asbestos, benzene, toluene, styrene, and ethylbenzene. Other nasty things it can filter out of your tap water includes atrazine, lindane, and endrin. All of which just means that this filter improves not only tap water’s taste but also its quality.
Can’t Find What You’re Looking For? Check these suggestions:
Without a doubt, more and more people are worried about the quality of their tap water. And this is easily seen by the rise in the sale of bottled water. Unfortunately, this rise in bottled water has seen in increase in plastic pollution, which can then lead to an increase in water contamination. It’s a vicious cycle that really has to be stopped.
Fortunately, a rising number of people are turning to water filters to solve this problem. These people understand that if they want to reap the benefits of cleaner and better tasting water, then turning to faucet water filters is a better option. And it’s an option that won’t contaminate the world’s bodies of water. Before we investigate filters, however, let’s take a closer look at water bottled in plastic bottles and see why that’s an unsustainable way of obtaining clean water.
What’s Wrong With Bottled Water?
Americans use over 9-billion bottles of water each year, but unfortunately, only about 20% of those bottles are recycled. The other 7.2-billion bottles end up in landfills, which contributes to a mountain of refuse that is causing serious problems for the environment. That’s because plastic from these bottles doesn’t always stay in the landfills. Small plastic particles can migrate into the river system. These rivers then dump into the ocean and contribute to the death of oceanic wildlife. This problems simply has to be solved.
This isn’t the only health risk posed by the use of plastic water bottles, though. Water found in plastic bottles isn’t always as safe as you think. Some bottles have been found to leak BPA into the water stored in them, and other types of bottles have been found to have higher than expected levels of bacteria in them. All of which are good reasons to switch to a faucet water filter.
What to Look For in a Faucet Water Filter?
Finding the best water filter for your faucet isn’t always easy, however. There are a number of different things to consider before you buy one of these units and the manufacturer’s don’t always make it easy for the consumer to find out everything they need to know to make an informed decision. That’s why we’ve created this little guide that will hopefully help you make a more informed decision. Below are some things to do when choosing a filter.
Investigate Your Water Quality
Not everyone needs the same strength of water filter. Some people may just need to remove some minor sedimentation from their tap water, and other people may need to remove industrial pollutants and heavy metals. That’s why you should find out what level of filtration you need. You can do this by looking at the water quality tests that your local water company or municipality is required to keep on file by the EPA. This report is either on your water company’s website, on your municipalities’ website or is published in the local newspaper.
You can also test the water yourself. This can easily be done by calling the Environmental Protection Agency’s Safe Drinking Water Hot-Line at 1-800-426-4791 or by visiting their website. They will provide you with the names of local testing labs that are certified by your state. Depending on where you live, you may also be able to receive testing kits at a reduced rate. The one thing you aren’t going to want to do, however, is to try to ascertain your water quality by looking at it. Judging your water quality in this manner is just not possible.
Buy an Appropriate Filter
Once you’ve determined what contaminates you need to filter out of your water, you can choose an appropriate filter. There are simple carbon faucet filters which merely strain the water and can remove basic sediments from the tap water. They can also help to improve the taste and odor of the water by removing chlorine and/or ammonia from the water.
Some municipalities use chlorine or ammonia to keep their drinking water potable. And these two elements actually help eliminate bacteria in the drinking water. However, they often do it at the expense of the water’s taste and smell. Since these two elements have already done their job in keeping your water safe, you can go ahead and remove them at the tap, so you don’t have to drink them.
Other people may need a filter which does a little bit more. There are plenty of filters that remove a variety of different contaminants from industrial pollutants to insecticides to heavy metals. Just make sure that you match up your needs with the filter you want to buy.
Ease of Installation
Another thing that has to be considered is how easy the faucet filter is to install. Most of the ones on the above list install by simply clicking onto the faucet, but there are some models that require a pair of pliers to install. Just make sure that your filtration system either comes with the necessary parts required to install it or that you have these on hand before purchasing.
Depending on your personal preferences, you may or may not want to get a filter with a replacement filter. Many models on the market have replacement indicators which tell you when the filter needs to be replaced. Some of these models simply use an indicator that turns red when the filter has been used up, but some of the newer models have digital indicators which actually tell you how long your filter has left.
Of course, if you feel like you don’t want or need a replacement indicator on your filter, then you can simply mark on the calendar when you installed your filter, and do the calculation yourself as to when your filter needs to be replaced.
The last thing that you need to consider is cost. While you may need to spend a little bit more to buy a filter with advanced filtration features, you shouldn’t spend outside of your budget. After all, if you spend more than you can afford, then you are less likely to replace the filter when it needs to be replaced, so always stay within your budget when you purchase a filter.