Top 10 Best Table Saws of 2019 – Reviews

Whether it’s used for ripping stock, cutting 2-inch pine down to a particular dimension, or cutting cupboard doors down to size, a table saw is a tool which will pay for itself in no time flat. It doesn’t matter if you’re a professional woodworker or simply someone who tinkers with wood on the weekends; eventually, you are going to need one of these saws.

Once you’ve determined that you need one of these tools and begin to search for one that fits your needs, you may become overwhelmed by the variety of models currently available. And that’s why we’ve decided to simplify the whole process for you and only show you the top ten models currently available. The following saws have the right combination of features and can become a useful addition to just about any home.

Best Table Saws – Top List

10Rockwell RK7241S Table Saw with Laser

buy from amazon

Providing one of the best cutting depths in its class, this table saw is designed to perform heavy-duty jobs. It has a maximum cutting depth of 2-9/16-inches at a 45-degree angle, and 3-9/16-inches at a 90-degree angle. This allows the user to rip through a 4×4 piece of pine with just one pass. This saw possesses 15-amps of power and has a no-load speed of approximately 4,800 RPM. And as if that wasn’t good enough, this tool also has integrated wheels, and its extended leg can be used as a pull handle. This allows the user to move it from one location to the next without a whole lot of hassle.

9Rockwell RK7323 Blade Runner X2

buy from amazon

This tool is portable, sets up in seconds and can cut through a variety of different materials. It can cut through not only wood and plastic but can also cut through aluminum and other metals and tile, too. It weighs less than 15-pounds, yet has a no-load speed of 3,000 RPM. This saw comes with five different blades, and these blades can be changed in 5-seconds or less without having to use tools to do the job. This means that the user can start out cutting wood one moment and then switch to cutting tile the next moment. Other features found on this saw include a vacuum port, a miter gauge, and a steel rip fence.

8Grizzly G0690 10-Inch Cabinet Table Saw

buy from amazon

While this cabinet table saw might be a little bit of overkill for DIY homeowners, but is perfect for someone who needs the power and the features this tool delivers. It’s made using heavy-duty cast-iron trunnions, has a 3-horsepower motor and features an impressive triple belt drive. It also features a riving knife, cast hand-wheels, a T-slot miter gauge and a dust collection port. This unit has an arbor size of 5/8-inch and an arbor speed of 4,300 RPM. It has a maximum depth cut of 3-1/8-inch at 90-degrees and 2-3/16-inch at 45-degrees. It’s designed to not only have the features needed to get the job done but to last a lifetime.

7Craftman Evolv 28461 10-Inch Saw

buy from amazon

Almost everything needed to start woodworking is included with the Craftsman Evolv 10-inch table saw. The saw comes with a carbide tipped blade, blade wrenches, hex keys, a stand, a blade guard assembly, a miter gauge, rip fence and a push stick. It also has a 6-foot cord length, a 25-inch by 17-inch steel table top surface and an arbor size of 5/8-inch. And since it has a 15-Amp motor, it has the power to do just about any task it was designed to do. While it’s not the most portable table saw available, since it only weighs around 50-pounds it’s pretty easy to transport to a job site.

6Makita 2705 10-Inch Contractor Saw

buy from amazon

Two key features which can be found on this contractor table saw is a 15-Amp motor and a tool-less modular blade system with an adjustable riving knife. It has a no-load blade speed of 4,800 RPM and a cutting capacity of 3-5/8-inches at a 90-degree angle and 2-5-inches at a 45-degree angle. This tool also has adjustable dual side guards, which make it quick and easy to measure to the rip fence from the blade. It also has two anti-kickback pawls and an innovative guard design that allows the operator to view the blade even as it is coming into contact with the wood.

5Skil 3410-02 Table Saw With Folding Stand

buy from amazon

Designed to be used by DIY woodworkers and handymen who need to get work done around the house, this 10-inch saw features a 20-inch by 26-inch cast aluminum table and has a 3.5-inch cut height capacity. This tool also has a self-aligning rip fence and an easy-view measurement system that allows the operator to achieve more accurate cuts. It has a no-load speed of 5,000 RPM, a 45-degree maximum cut depth of 2.5-inches and a 90-degree max. cut depth of 3.5-inches. This saw also has a heavy-duty steel stand and comes with a miter gauge, two blade wrenches, and a carbide-tooth blade.

4Skilsaw SPT70WT-01 10-Inch Portable Worm Drive

buy from amazon

This worm-drive table saw is one of the first of its kind and is designed for heavy-duty ripping. It features a 15-Amp dual-field motor that delivers great cutting speed and a 25-inch rip capacity. It has a 3.5-inch depth of cut that allows this saw to handle a variety of different materials and perform a number of jobs. This tool has a self-aligning rip fence with on-tool storage that delivers a true cut. It’s also equipped with a 24-tooth carbide-tipped blade and has a miter gauge, an anti-kickback guard system and an insert plate. And since it weighs approximately 50-pounds, it’s portable enough to take to just about any job.

3Dewalt DWE7491RS Saw

buy from amazon

With a 32.5-inch rip capacity and a 3-1/8-inch depth of cut at 90-degrees, this 10-Inch job site saw is designed to quickly handle even tough jobs. It delivers a 2.25-inch cut at 45-degrees, has a 15-Amp motor that delivers true power and comes with a rolling stand. It also features a rack and pinion fence system, a 2.5-inch dust collection port which can be hooked up to a vacuum and it has a 26.25-inch by 22-inch table surface. All of these features ensure that the operator gets the most accurate and cleanest cut possible and do so without a lot of complications.

2Bosch 4100-09 10-Inch Work Site Saw

buy from amazon

Equipped with an innovative and easy-to-use gravity rise saw stand that can be adjusted to a specific height and 8-inch pneumatic wheels, this table saw is easy to take from one job to the next. It features a powerful motor who can produce up to 3,650 RMP and has a table surface area that can handle stock up to two-feet wide. This tool also comes with a smart guard system, a square lock rip fence, anti-kickback pawls and a riving knife system. This tool is designed to be easily set up and taken down, so the operator can get their work done as efficiently as possible.

1Dewalt DW745 10-Inch Compact Saw

buy from amazon

Weighing approximately 53-pounds and with an optimized footprint, this table saw is portable enough to be taken from the garage to the job site. Portability isn’t the only feature to be found on this saw, however. It also has power. This unit has an 1850-Watt high-torque motor that delivers up to 3,850 RPM of no-load speed. This unit also has easy-to-use telescoping fence rails, a dust collection port that makes dust cleanup a snap, and a modular guarding system. Whether this saw is used at the house or at the job site, the operator can expect to get power and performance out of it.

Can’t Find What You’re Looking For? Check these suggestions:


Getting The Most Out Of A Table Saw

Once you’ve secured the table saw you’ve always wanted, it’s now time to consider taking the steps necessary to get the most out of your investment. While table saws are great for making a variety of different joints, for ripping boards to size and for crosscutting stock, they are only useful if they are operated properly. And this depends on whether the operator takes the necessary steps to ensure that their table saw is set up properly and is always kept in proper condition. To help you along with these goals, we’ve included the following guide which will keep some key points regarding table saws in the forefront of your mind.

Equip The Correct Blade

While there are a number of different saw blades, when you break it down there are only two types that most users should worry about. There are crosscut blades, which have up to 80-teeth and there are general purpose blades with up to 50-teeth. For general ripping, a 50-tooth blade will usually do just fine. Of course, if you’re crosscutting, then investing in a crosscut blade is just about a necessity. There are also blades that serve the purpose of cutting a particular material, and if you work with these materials, then you may want to buy one of those for your table, too.

Correct Blade Height

Unfortunately, too many people don’t pay enough attention to the height of their blade. They either have it too high so that it poses a hazard, or they position it to low so that it overheats the motor. The general rule is that the blade should be raised so that about 3/16th-inch of the blade is exposed above the wood at the apex of the blade. Which usually means that just one full tooth of the saw is exposed at the blade’s apex.

Proper Blade Alignment

The blade and the table fence must be parallel to the miter slots to ensure clean cuts with the saw. While some table saws have a guide which keeps the distance between the front of the blade and the slot at a precise distance, many of them don’t. On models that don’t, you’re going to have to use a blade aligning tool to measure the distance from the front of the blade to the slot and then to the back of the blade to the slot. If both of these measurements are equal, then nothing has to be adjusted. However, if adjustments do have to be made, then the table should be adjusted to make these measurements equal.

The Miter Gauge

The table you’ve purchased should have a miter gauge with positive stops at 0-degrees, 10, 22.5, 30 and 45-degrees. This allows the saw to make the same cuts over and over again and to do it efficiently. If your table doesn’t have a miter gauge or one that has the positive stops you need, then you can always buy an aftermarket model.

Ensure The Table Saw Has Room

You should also make sure that your table saw has the adequate space it needs to operate. It doesn’t matter if you’re using it at a workshop, in the garage or at a job site, your table saw needs a little bit of room to safely operate. Always make sure there is at least 4-feet on either side of the blade and that there is at least 8-feet in front and in the back of the blade.

Outfeed Support

If your table saw has outfeed support, then use it for cutting sheet boards and longboards. This ensures that the end of the wood doesn’t lift up as the cut is finished, something that can not only result in poor quality cuts but can also produce an unsafe kickback. If your table saw isn’t equipped with one, then consider buying a roller stand to support your outfeed.

Keep The Top Clear

Keeping a clear table top surface for your table saw is vitally important. Not only to keep up the cut quality but for safety reasons as well. The wood needs to feed nice and smoothly across the tabletop, so make sure to use a shop vacuum to clear away sawdust and wood bits from the top of the table, from around the fence and out of the miter slots. Many tables come with dust ports to make it easier to keep the table clean, so be sure to use them.

Make Sure Throat Plate Is Level

After you have finished cutting for the day and have vacuumed all of the debris from the table, make sure that the throat plate is level as well. Make sure that all of the debris from around it is removed and then use a straightedge to see if it’s flush with the saw’s tabletop. If it isn’t, then use the adjustment screws to either lower it or raise it into position. Before you begin cutting again, always make sure the throat plate is level. If it’s not level with the tabletop, it can catch a piece of work during a cut. This can not only ruin the cut but can also be potentially unsafe.

Buy a Dadoo Set, If Needed

If you intend on making a lot of joinery cuts such as tongue and groove joints, cross grain channel cuts, locked rabbets or box joints, then you are going to want to make sure that either your table saw is equipped with a dado set or that you buy an aftermarket dado set. A good dado set will have both the blade and the necessary insert to accommodate the blade’s width.

Keep Up On Maintenance

It’s important to maintain the table saw. Keep a log next to the saw that keeps track of how many hours of use is logged every day. Then make sure that you do routine maintenance on the table saw according to manufacturer’s instructions. This means ensuring the blade is in alignment, that the riving knife or splitter is flush with the blade, ensure the table top and outfeed rollers are smooth, that trunnions and gears are properly lubed and that any parts are repaired or replaced when they’re worn out.

In Conclusion

Ensuring that you take the proper precautions, make sure that the table saw is properly set up and engage in proper cleanup and maintenance procedures will ensure proper operation and safety. Then your tabletop saw will give you many years of flawless cuts, not only today but also for many years to come.