Although just about any type of glue can be used to glue wood, if you want to achieve professional results, then you are going to want to use wood glue for your wood projects. There are a variety of different brands of this type of glue, and many of them will do an exceptional job when they’re properly used on a project. All the carpenter, woodworker, or DIY enthusiast has to do is to find the right brand for their application. To help these people out, we went ahead and did some research and have found ten of the best wood glues currently available.
Best Wood Glues Of 2019
10Aleene’s 4-Ounce Wood Glue
This tan colored glue is designed for wood on wood applications, and it quickly sets up a permanent bond in approximately 24-hours. This formula is non-toxic, so it’s safe to use around the shop, and it creates a pretty strong bond when it’s properly used. This super strong formula can also be sanded after the glue has dried to create that professional quality appearance for all of your projects. It’s available in a 4-ounce bottle that’s easy to hold and has a nozzle that allows it to be used for spot welds. Overall, it’s a high-quality product that isn’t too expensive and gets the job done right.
9J-B Weld Wood Weld Epoxy Adhesive
Most people know J-B Weld from this company’s reputation. After all, there are plenty of rumors of their adhesives being used to repair everything from busted vehicle trim to cracked engine blocks. However, not many people realize that they also make a Wood Weld that’s appropriate for performing wood repairs. This product sets in approximately 6-minutes and cures to a light tan color in approximately 3-hours. This allows it to be used for everything from furniture to windows to even decks. It can be used for both indoor and outdoor applications and quickly sets up a bond that can withstand up to 1,800 PSI.
8Elmer’s Interior Carpenter Glue
This Elmer’s Wood Glue has been a friend of carpenters for quite some time now, and that’s because it has a number of features which makes it suitable for many interior woodworking applications. This 8-ounce bottle contains a glue that’s non-toxic and doesn’t create any fumes but can be applied quite smoothly. This product sets up quickly, and any excess glue can easily be cleaned up with water before it dries. Once it dries, however, it creates a bond that’s stronger than wood and is capable of being sanded or painted. It’s a great glue that no carpenter should be without.
7Glue Masters Thin CA Glue
This 16-ounce bottle contains Cyanoacrylate glue, a type of glue that isn’t specifically designed for woodworking projects but is capable of fulfilling that role. It’s a thin glue that cures in 10-seconds or less and can be used for a variety of home repairs. It can be used for general carpentry work, for shoe repairs, and for general household repairs. This makes it one of the more versatile glues on this list and definitely one that people are going to want to keep around the home. This product creates one of the strongest bonds available and is a great instant glue.
6Glue Masters Instant Medium Viscosity Glue
This medium viscosity instant glue is designed for a wide variety of applications include craft and woodworking applications. It’s made with a Cyanoacrylate Resin that forms one of the strongest bond available in its price range and has an extended shelf life so it won’t go bad before the consumer can use it. When applied to a surface, this glue sets up in approximately 30-seconds and in no time flat sets up to an incredibly strong bond. This is probably why this particular type of glue has been used by hobbyists everywhere for a wide variety of applications and uses.
5Gorilla Indoor/Outdoor Wood Glue
Although Gorilla Glue may not have been around as long as other types of glues, it’s quickly becoming a respected and recommended product. This water-based adhesive is suitable for a variety of hobby, craft and carpentry projects and creates a nice strong bond. It only requires about a half an hour of setup time, and it fully cures in approximately 24-hours. And once it’s fully dry, it has a natural color that’s almost invisible. This quality product can be used on just about any types of woods, including softwoods and hardwoods, and it’s suitable for both indoor and outdoor projects.
4Elmer’s Carpenter’s Wood Glue Max
Elmer’s Wood Glue Max is a glue that’s recommended by quite a few carpenters and for good reason. It’s one of the few types of glue that is not only waterproof but is stainable as well. It’s also sandable, paintable, and can be used for either indoor or outdoor projects. And it’s superior formula is designed to hold up to heat, mold, and mildew as well. Its application is extremely smooth and messes can be easily cleaned up with only water and a rag. Another key feature is that its non-toxic formula doesn’t produce any harmful fumes either. All of these features have made this glue the standard in many carpenter’s workshops.
3Titebond Ultimate Wood Glue
Titebond III is a wood glue that’s designed for any woodworking application regardless of whether it’s an indoor or an outdoor one. This product comes in a 32-ounce bottle that has a special design that allows it to spread the glue evenly on the surface of the wood project. And once applied, this product is capable of producing a bond that’s stronger than wood. What’s remarkable about this high-quality glue, however, is that it can easily be cleaned with water before it dries and produces a bond that’s incredibly strong—even for low-temperature applications. And since it has a longer assembly time than other types of glue, the user never has to rush to get the job done.
2Titebond Original Glue
Although this glue is designed to be used only for interior projects, it has a combination of features make it a useful wood glue to have around the home or workshop. It goes only smoothly and easily, and once applied it sets up quite quickly. This alleviates the long clamp time that other glues require. While working with this product, any messes can easily be cleaned up with a rag and water. Once it sets, however, it creates a bond that few types of glue can match. It’s a glue that’s solvent resistant when dry and can easily be sanded or painted if necessary.
1Titebond II Premium Glue
This premium wood glue is made in the U.S and is widely considered to be one of the best wood glue products currently available. It can be used for both interior or exterior application, and it sets up in approximately 5-minutes or less. Thanks to its bottle design, this product is also very easy to apply to a project, and it stores for long periods of time quite well. This glue is also water-resistant and is FDA approved for indirect food contact surfaces. Once this glue has fully set, it can easily be sanded, painted or stained and is designed to provide a quality permanent bond.
Can’t Find What You’re Looking For? Check these suggestions:
Tips For Using Wood Glue
Wood glue is probably one of the best inventions to hit the woodworking scene since man first started working with wood. It allows the carpenter or woodworker to join two pieces of wood together without having to construct a joint and without having to use nails or screws. This makes it an ideal solution for cabinet makers, furniture makers or anyone else who wants to join two pieces of wood together or wants to make sure that their joints are rock solid.
Although most woodworking communities have embraced the use of wood glue in one form or another, what prevents some Do-it-yourself enthusiasts from getting onboard is their perception that wood glue is messy or is hard to use. To lay those concerns to rest, we’ve come up with the following tips that will allow DIY enthusiasts to use wood glues more effectively and more easily.
Tip #1: Buy The Best Wood Glue Possible
When choosing a wood glue, it’s important to choose the right one for your application. Although a lot of people don’t realize that there are different varieties of wood glues, the truth of the matter is that there are at least three basic types of wood glue that has to be considered. There’s PVA I, PVA II and PVA III modes. There are also a number of all-purpose glues that are often used for certain wood projects, and these glues are CA (Cyanoacrylate) Glue, Epoxy Glue, and Polyurethane glues. However, since this is an article on wood glues, let’s examine the three types of PVA types below.
PVA Glue I
- Application Type: Indoor
- Glue Strength: 3,600 PSI
- Glue Setup: Sets up quickly
PVA Glue II
- Application Type: Indoor/Outdoor
- Glue Strength: 3,700-3,750 PSI
- Glue Setup: Sets up quickly
PVA Glue III
- Application Type: Ideal for lower temperatures
- Glue Strength: 4,000 PSI
- Glue Setup: Takes longer to set up than other PVA glue types
Tip #2: Use A Notched Trowel To Apply
A quick way to apply wood glue is to use a notched trowel. Using this tool will enable the user to cover large areas quickly before the glue has time to set up. Notched trowels can easily be found online or at any of the big box stores in the flooring department.
Tip #3: Shave Off Excess Trim
A common method of removing the glue that squeezes out from between two joined pieces of wood is to immediately clean it off with a damp towel. However, there is another method of removing excess glue. Allowing the excess glue to dry fully and then shaving it off is a much easier way of dealing with excess glue on your work.
Tip #4: Use A Coffee Cup As A Glue Tray
If you’ve ever seen paint trays, then you know that they’re trays that the painter uses to hold paint so they can dab a paintbrush into it for painting. Using an upturned coffee cup can work the same way for holding glue. Simply turn a coffee cup upside down and then dab glue on it. You can now dab your paint brush or other applicators into it for complicated gluing jobs.
Tip #5: Use Waxed Paper For Bar Clamps
If you’re tired of glue getting all over your bar clamps when working on a job, then do yourself a favor and cover them in waxed paper before you glue your project. This also prevents a dark spot from forming where the glue, the wood and the bar clamp all come into contact with each other. When you’re done, the waxed paper can then be simply tossed into the trash.
Tip #6: Properly Prepare The Surface First
Okay, this probably should’ve been the first tip on this list of tips because it’s probably the most important one. The reason why a lot of glues don’t stick the way they should is that the wood’s surface isn’t properly prepared to hold the glue. Although most applications will require the wood to be cleaned with a simple cleaner to remove dust, exotic types of wood often have to be sanded with suitable grit sandpaper before they’re glued together.
Tip #7: Don’t Forget Post Application Prep
Once the project has been glued and clamped, then it’s time to double check your work and make sure there aren’t any spots of glue that you missed. This is the stage to clean up any of these spots and ensure that your work is as good as it can be, so go over your work carefully and don’t rush your final inspection.